Flowtec Industriearmaturen banneroverlay
Valves
>
Pinch valve

Find the right pinch valve for your requirements!

Our valve finder will help you find thepinch valve for your requirements. Searched and not found? Our range goes much further. For special products and individual advice, contact us directly.

Filter the results

Showing 1–6 of 160 results

    Bi-directional knife gate valve

    Type EB - Grauguss / Sphäroguss (Orbinox)
    Pressure: 16
    Nominal size: 50-1200

    “The gate valve model EB from Orbinox is a bi-directional wafer type knife gate valve.

    The knife gate valve was designed for waste water treatment applications.

    The design of the housing and seat ensures blockage-free shut-off when using suspended solids in many areas.”

    Add Bookmark

    Globe valves in 2- and 3-way design

    (Burocco)
    Pressure: 16 / 40
    Nominal size: 15 -100
    The Burocco soft or metal seated 3-way control valves are specially designed for control operations in medium and low-capacity plants. The Burocco control valves have a 3-way body with screwed seats and a switching or mixing function. The valve cone type V-Port is guided into the seats from above and below. Seal type: Soft (class VI) or metal (class IV - V) Characteristic: Linear
    Add Bookmark

    DIN flanged ball valve, short pattern, floating

    Type 516 / 540 (JC Valves)
    Pressure: 40bar
    Nominal size: 15 - 200

    “The JC Valves flanged ball valve type 516 / 540 is a floating ball valve according to DIN with a short DIN face to face length.

    The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    A large selection of materials makes the soft seated, floating DIN flanged ball valve flexible to use.
    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. “

    Add Bookmark

    Ball check valve

    (ERHARD)
    Pressure: PN10
    Nominal size: 50 - 400
    The Erhard ball check valve offers backflow protection based on the ball check valve operating principle. In the open position, the sealing ball is pushed out of the flow cross-section by the medium. The Erhard ball check valves are particularly suitable for use in the waste water sector where there is a high risk of clogging. Advantages: Erhard ball check valves are resistant to dirt and are extremely maintenance-friendly as the valve works without mechanically moving parts. In addition, the ball check valve has low flow resistance in the open position.
    Add Bookmark

    No dead space bottom outlet valve

    Type 607 / 602 / 606M / 606N (Guichon)
    Pressure: 150 - 1500 + PN 10 - 420
    Nominal size: 1/2" - 16" DN 15 - 400
    Guichon Kegelbodenventile und Kolbenventile werden je nach Kundenanforderung konstruiert und gefertig. Als Basis gibt es dazu vorgefertigte Standardmodelle, die individuell angepasst werden. Diese können mit Kegel im Gehäuse öffnend, mit steigendem Kegel, metallisch dichtend oder auch mit radialer Abdichtung ausgeführt sein. Die Bodenablass-Kolbenventile werden hauptsächlich für hochviskose, aggressive Medien eingesetzt. Sie können als Regel, AUF/ZU und Handarmaturen verwendet werden. Das Hauptmerkmal liegt an der totraumfreien Medienführung, weshalb die Armaturen oft auch als Probenahmeventil verwendet werden. Des Weiteren sind sie an Tankböden im Einsatz.
    Add Bookmark

    Ball segment walve, flanged design

    Type KVTF / KVXF (Somas)
    Pressure: 25
    Nominal size: 80-600

    “The Somas ball segment valve type KVTF is a flanged ball segment valve with a centrically mounted shaft and the KVXF has an eccentrically mounted shaft.

    The valve housing consists of one piece and has a full bore. The unique system of a shaft with a clamping coupling was developed by Somas for backlash-free torque transmission and enables extremely precise control behaviour”

    Add Bookmark