Find the right strainer valve for your requirements!
Our valve finder will help you find the right strainer valve for your requirements. Searched and not found? Our range goes much further. For special products and individual advice, please contact us directly.
Filter the results
Showing 37–42 of 160 results
ANSI cast trunnion design, flanged ball valve, soft/metal seated
Type 2515 / 2530 (JC Valves)
Pressure: 50bar
Nominal size: 2" - 16"
"The JC Valves ball valve type 2515 and 2530 are flanged cast trunnion ball valves according to ANSI Class 150 or 300 respectively. They can be designed as both soft and metal seated valves. A large selection of materials makes the ball valve even more flexible.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. "
ANSI double block and bleed ball valve, floating
(JC Valves)
Pressure: 10 - 172bar
Nominal size: 1/2" - 4"
"The JC Valves “double block & bleed” (DBB) valves are designed and produced to provide a reliable alternative to multi-stage shut-off valves.
They reduce the possible leakage points, lower installation and maintenance costs.
Combining all the shut-off and drain components within a valve leads to a significant reduction in weight and piping.
The valves are either available in a flanged or bolted design."
ANSI flanged ball valve, semi trunnion
Type 1515 / 1530 (JC Valves)
Pressure: 50bar
Nominal size: 8" - 12"
"The JC Valves types 1515 and 1530 are flanged ball valves according to ANSI with a semi-trunnion bearing. It is important to note that the seal is not live loaded and is therefore not innately pressed onto the ball.
This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating and those of the trunnion ball valve and fills the gap between these two.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. Another advantage is also the availability of a large selection of materials that makes the ball valve even more flexible. "
ANSI gate valve
Type VC150BB / VC300BB / VC600BB / VC900BB / VC1500BB / VC2500BB / VC900PS / VC1500PS / VC2500PS (JC Valves)
Pressure: 10 - 172bar
Nominal size: 2" - 36"
"The JC Valves gate valves are designed with either a bolted or pressure seal bonnetand a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”.
The valve is designed with an outside screwed stem and according to ANSI.
This gate valve is mainly used in the oil and gas, chemical, petrochemical, energy and mining industries."
ANSI gate valve, forged design
Type VC150BB / VC300BB / VC600BB / VC900BB / VC1500BB / VC2500BB / VC900PS / VC1500PS / VC2500PS (JC Valves)
Pressure: 10 - 172bar
Nominal size: 2" - 36"
"The JC Valves gate valves are designed with either a bolted or pressure seal bonnet and a flexible wedge. The valve can be produced with nominal diameters greater than 2 1/2”. The valve is designed with an outside screwed stem and according to ANSI.
The JC Valves ANSI gate valves are mainly used in the oil and gas, chemical, petrochemical, energy and mining industries."
ANSI metal seated flanged ball valve, floating
Type 3515 / 3530 (JC Valves)
Pressure: 50bar
Nominal size: 1/2" - 8"
"The JC Valves ball valve type 3515 / 3530 is a floating ball valve according to ANSI with a metal seat. It is a flanged ball valve for ANSI piping.
The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. Another advantage is the large selection of materials that makes the ball valve even more flexible. "