Flowtec Industriearmaturen banneroverlay
Valves
>
Strainer valve

Find the right strainer valve for your requirements!

Our valve finder will help you find the right strainer valve for your requirements. Searched and not found? Our range goes much further. For special products and individual advice, please contact us directly.

Filter the results

Showing 115–120 of 160 results

    Needle valve

    Type RKS / RKV (ERHARD)
    Pressure: '10 / 16 / 25 / 40 / 63 / 100 / 160
    Nominal size: 100 - 2000
    ERHARD needle valves are innovative valves for the safe control of pressure stages and flow rates. The control valves type RKS/RKV are characterised above all by optimised flow behaviour and ultra-low pressure losses when fully open. The control range can extend up to 96%. There are different control inserts for each area of application in order to cover all operating cases: a vaned ring, slotted cylinder, pipe cylinder and other special inserts. The needle valves have a wide main seal in the cavitation-free space and also an additional shaft seal.
    Add Bookmark

    Non contact rising stem ball valve

    Type RSBV (Control Seal)
    Pressure: ANSI 150 - ANSI 2500 (~PN20 - 420)
    Nominal size: 1" - 36"
    Extra robust! Non contact rising stem ball valves are designed for extreme applications. They have a special rotary-axial movement that eliminates any wear and ensures 100% tightness.
    Add Bookmark

    On/off and control butterfly valves

    Type HRD / HRA (Herberholz)
    Pressure: max. 2bar
    Nominal size: DN15 - DN1200

    The throttle valves HRD and HRA are designed as a wafer type valve with a centric valve disc.
    Depending on the choice of material, they are designed for operating temperatures up to 1050°C. In the high-temperature version, they have a welded wafer type housing or a one-piece housing.

    The throttle valves are suitable for valves according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47, with lengths according to DIN EN 558-1-R20, as well as from DN400 according to the company standard.
    The connecting flange is for actuators according to DIN EN ISO 5211.
    Testing according to DIN EN 12266.
    SIL approval according to ICE 61508 and ICE 61511

    Versions:
    HRD without seat (leakage approx. 1% of surface equivalent),
    HRA metal seated (leakage approx. 0.5% of surface equivalent), HRA with seal ring (leakage approx. 0.3% of surface equivalent),
    HRA with metal travel stop ring with seal ring (leakage approx. 0.1% of surface equivalent)

    Add Bookmark

    On/off and quick-closing butterfly valve

    Type AK / SSK (Herberholz)
    Pressure: 6-10bar
    Nominal size: DN50 - DN400
    The butterfly valve is designed for all flammable gases according to EN437 and other neutral gases. The safety shut-off butterfly valve was developed according to EN161 A (closing time <1 s), approval according to DIN EN IEC 61511, up to and including SIL3. It consists of a one-piece housing, seals tightly and has a centric valve disc and a leak-proof shaft. For clamping between flanges according to DIN EN1092-1, length according to DIN EN 558-1-R20. Leakage rate A according to DIN EN 12266-1, maximum permissible operating pressure 10 bar, from DN350 <1.5 bar
    Add Bookmark

    PFA lined ball valve, Neotecha

    Type NTB / NTC (Emerson)
    Pressure: PN16 ANSI 150
    Nominal size: 15-150 1/2" - 6"

    Um eine besonders gute mechanische Festigkeit des Kerns und eine hohe chemische Beständigkeit der Auskleidung zu erreichen hat Neotecha eine spezielle Technik entwickelt um PFA auf einen Metallkern aufzutragen. Mit dieser Technik bietet Neotecha Armaturen die weltweit bekannt sind, für ihre Zuverlässigkeit in den schwierigsten korrosiven Anwendungen. Der PFA-ausgekleidete Kugelhahn von Neotecha-Emerson eignet sich aufgrund seiner qualitativ hochwertigen Verarbeitung hervorragend um gute Standzeiten in den härtesten Prozessumgebungen zu erreichen. Zuverlässigkeit in den anspruchsvollsten korrosiven Anwendungen!

    Add Bookmark

    Pinch valve aiRFlex®

    Type BS (RF Valves)
    Pressure: 4bar
    Nominal size: DN25 - DN350

    “The aiRFlex® pinch valve is designed for abrasive, corrosive and scaling sludge, liquids and powders.

    It is characterised by a full bore and it is interchangeable with most ball valves and diaphragm valves.

    Technical advantages:
    * Patented expansion folds prevent stretching. This reduces the stress on the tube and significantly increases the service
    life
    * No moving parts – tube is the only wear part.
    * Trouble-free operation – no blocking or clogging.
    * Increased service life of the tube, which does not stretch when closed.
    * Cost-effective solutions as no actuator is required.
    * The tube can be replaced without having to remove the valve from the line, thus guaranteeing low maintenance and operating costs.

    Operating pressure about 2 bar below
    the available factory air supply, up to
    max. 6 bar.
    The MONSYS monitoring system prevents
    unexpected emergency repairs.
    “

    Add Bookmark