Find the right strainer valve for your requirements!
Our valve finder will help you find the right strainer valve for your requirements. Searched and not found? Our range goes much further. For special products and individual advice, please contact us directly.
Filter the results
Showing 97–102 of 160 results
Flanged globe style control valve
Type RC210 (USA: Typ 860 / 1499) (Badger Meter)
Pressure: max. 320 bar
Nominal size: 1/2", 3/4", 1"
The Badger Meter flanged flow control valve is suitable for the control of medium to ultra-small flow rates when using liquids, gases or steam in general industry, research, development and pilot plants.
Due to its compact size, it is particularly suitable for the dosing of additives, for sampling and for hydraulic systems with small flow rates.
High pressure control valve
Type HP-10 (10000psi) (Badger Meter)
Pressure: max. 689 bar
Nominal size: 1/4", 1/2"
The high-pressure control valve type HP-10 is used wherever the standard type RC200 comes to its limits due to too high pressure.
The high-pressure control valve type HP-10 is the right valve for liquids and gases in high-pressure applications with medium to small flow rates and is available as a globe or angle valve.
LDM Valves, 2- und 3-Wege Regelventile
(LDM Valves)
Pressure: PN16-PN40
Nominal size: DN15-300
"Straight and 3-way type control valve with a mixing or distribution function.
Housing material: Spheroidal cast iron, cast steel, stainless steel.
Turndown ratio: 50:1
Optionally with bellows, LDM spline, perforated cone,
Oxygen and food-compatible design available
Nominal diameters: from DN15 - DN300, PN16 - PN40
Temperatures: from -20°C to +500°C
Leakage rate class: III/IV according to EN1349
Length according to EN 558-1
Approvals: CE, ATEX, ISO9001:215, TRD100/110/201, TRB 801, ISO14001:2015, OHSAS"
Limit switch box
Type i-box (Eurotec)
Compact, simple and efficient.
The i-box is produced by the quality manufacturer Eurotec in Germany. Thanks to its sophisticated mounting system, it can be quickly and easily installed directly on the actuator and is therefore extremely space-saving. Despite its very compact design, it offers space for 1 to 2 mechanical toggle switches or inductive sensors in the V3 design.
Its large OPEN-CLOSED display is still visible even from a distance. Alternatively, it can be equipped to display T or L-bores. The standard version is suitable for an 80x30 mm actuator bore pattern with shaft heights of 20 and 30 mm. The height and width adjustable stainless steel bracket IMBHV is required for other bore patterns. The i-box housing achieves protection classes IP66 and IP67 according to DIN EN 60529.
Limit switch box
Type wave (Eurotec)
"The all-rounder: flexible, compact and easy to stock.
The wave limit switch box was developed in 2008 and is still produced exclusively in Germany today.
The Eurotec wave is very flexible with its classic design. It accommodates 1-4 mechanical microswitches and sensors in the V3 design. Slot initiators and cylindrical sensors (max. diameter 18 mm / max. length 50 mm) can also be installed.
The housing is available in polyamide, Vestamid and aluminium. All versions of the wave series achieve protection class IP67 due to the curved bonnet.
There is a low-cost version with a very stable glass fibre-reinforced plastic bracket and a chemical version with our high-quality stainless steel bracket MBHV.
All brackets are height and width adjustable and are included as standard."
Limit switch box
Type d-Box, neptun, flex (Eurotec)
In addition to our Eurotec main products, the wave and i-Box, we also have all the other Eurotec limit switch boxes in our range.
flex Box: Nomen est omen - this model is particularly flexible and is suitable for harsh conditions with particular requirements for stability and load capacity as well as for applications with a salty atmosphere, sulfur gases and ammonia nitrate.
neptun: made of high-quality stainless steel, it is particularly resistant to corrosion and pitting. For use in offshore applications, the chemical industry and environments with a salty atmosphere, sulfur gases, ammonia nitrate and numerous other aggressive media.
big Box: For large cylindrical sensors with an M30 thread or special length.
Eurobox: For larger and above all longer sensors.
These include the d-Box, the neptun, the Eurobox, the flex model as well as the big box or the plastic version.
Please visit the manufacturer's website or contact one of our team for more information on these products.