Flowtec Industriearmaturen banneroverlay
Valves
>
Pinch valve

Find the right pinch valve for your requirements!

Our valve finder will help you find thepinch valve for your requirements. Searched and not found? Our range goes much further. For special products and individual advice, contact us directly.

Filter the results

Showing 139–144 of 160 results

    Soft seated, ANSI flanged ball valve, floating

    Type 515 / 515B / 530 / 530B (JC Valves)
    Pressure: 50bar
    Nominal size: 1/2" - 8"
    "The JC Valves ball valve type 515 / 515B / 530 / 530B is a floating ball valve according to ANSI. It is also a flanged ball valve for ANSI piping. The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. A large selection of materials, which makes the ball valve even more flexible, is another advantage of the JC Valves ball valves. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. "
    Add Bookmark

    Soft seated, ANSI flanged ball valve, floating

    Type 560 / 560B / 660 / 660B (JC Valves)
    Pressure: 100bar
    Nominal size: 2" - 4"
    "The JC Valves ball valve type 560 / 560B / 660 / 600B is a floating ball valve according to ANSI Class 600 and can either be designed with a full or reduced bore. A large selection of materials makes the ball valve even more flexible. The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. "
    Add Bookmark

    Soft seated, ANSI flanged ball valve, floating, full bore

    Type 590B / 550B (JC Valves)
    Pressure: 150bar
    Nominal size: 1/2" - 2"
    "The JC Valves ball valve type 590B and 550B are floating flanged ball valves according to ANSI Class 600 or 1500 respectively. The standard version of the ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. Another advantage is the large selection of materials that makes the ball valve even more flexible. With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. "
    Add Bookmark

    Soft seated, butterfly valve

    Type GRW (Zwischenflansch) / GRL (Anflansch) (Emerson)
    Pressure: 16bar (DN20-DN300) 10bar(DN350-DN900)
    Nominal size: DN20-DN900

    “The Emreson resilient seated butterfly valve is a centric butterfly valve with a split shaft (up to DN300), rounded polished disc edge, centring bores on the valve housing and an extended valve neck allows for pipe insulation.

    The type GRW is designed as a wafer type valve and the GRL as a flanged type valve according to EN558 series 20, with a spheroidal cast iron housing and a disc in 1.4408 steel. “

    Add Bookmark

    Soft seated, DIN flanged ball valve, long pattern, floating

    Type 563 / 599 (JC Valves)
    Pressure: 100bar
    Nominal size: 15 - 100

    “The JC Valves soft seated flanged ball valve type 563 / 599 is a floating ball valve according to DIN with a long DIN face to face length.

    The standard version of the soft seated, floating DIN flanged ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a “”live loaded”” packing.

    With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries. A large selection of materials makes the flanged ball valve flexible to use. “

    Add Bookmark

    Soft seated, forged monobloc ball valve

    Type 400 / 41500 (JC Valves)
    Pressure: 240bar
    Nominal size: 3/8" - 2"
    "The JC Valves type 400 and 41500 is a forged monoblock ball valve that can also be used for high pressures up to 240 bar. The standard version of the soft seated monoblock ball valve includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing. The valve can be designed with both bolted and welded ends. Thanks to a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), this monoblock ball valve can be used in virtually all industries. A large selection of materials opens up a wide range of applications. "
    Add Bookmark