Filter the results
Showing 7–12 of 33 results
Ball valve
(ERHARD)
Pressure: '10 / 16 / 25 / 40
Nominal size: 80 - 1200
ERHARD ball valves are characterised by a full port, a low overall height and a low-flow design with ultra-low pressure loss for energy-saving and economical operation.
The design principle is a double offset with a free-flowing ball plug. It is designed as a bi-directional valve. The profile ring is in the open position outside the flow. The ERHARD ball valve is also equipped with a robust sealing section with a non-sensitive surface.
Compact ball valve, soft seated
Type FA1 / FA2 / FB1 / FB2 / FC1 / FC2 (Adler)
Pressure: 10 - 160 / 150 - 1500
Nominal size: 10 - 250
Due to its compact design, the compact Adler ball valve (Type FA1/FB1/FC1/FA2/FB2/FC2) is a space-saving variant of the flanged way ball valves.
The valve is made of steel or stainless steel and can be produced as a wafer or flanged ball valve. Depending on the type, the valve is made of cast or solid material.
The compact Adler ball valve is used in all industries.
DIN flanged ball valve with heating jacket, long pattern, floating
Type 553 (JC Valves)
Pressure: 36bar
Nominal size: 15 - 100
"The JC Valves ball valve type 553 is a flanged ball valve with an integrated heating jacket. The heating jacket prevents the hardening or viscous medium damaging the valve at low temperatures.
The standard version of the flanged ball valve according to DIN with a heating jacket includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing.
A large selection of materials makes the ball valve 533 very flexible to use.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3, and many others), it can be used in virtually all industries.
"
DIN flanged ball valve, semi trunnion, long/short pattern series
Type 1516 / 1540 / 1316 / 1340 (JC Valves)
Pressure: 40bar
Nominal size: 200 - 300
"The JC Valves type 1516 / 1540 / 1316 and 1340 are flanged ball valves according to DIN with a trunnion bearing in long or short pattern.
This type is used when a floating ball valve reaches its limits, but a trunnion ball valve is not necessary. This variant is therefore a version that combines the advantages of the floating ball valve and those of the trunnion ball valve and fills the gap between the two.
It is important to note that the seat in these models is not live loaded and is therefore not innately pressed onto the ball.
The standard version of the DIN flanged ball valve with a trunnion mounted ball includes a anti-blow out stem, an antistatic device, a pressure balancing cavity hole and a ""live loaded"" packing.
The large variety of materials opens up a wide range of applications for this series.
With a wide range of approvals (Fire Safe, Fugitive Emission, ATEX, TRCU, CRN, SIL 3), it can be used in virtually all industries. "