| Marken | Somas |
|---|---|
| Funktion | Control valves, On-off valves |
| Industrie | Energy, Petroleum, chemical, Pharmaceutical, Plant engineering & construction, Pulp & paper, Sugar, starch |
| Anwendung | Chemical resistance, Pharmaceutical processes, Pulp & paper applications, Steam and energy |
| Nenndruck | ANSI, 150, PN, 10, 16, 25 |
| Betriebstemperatur | Standard temperature |
“Somas has developed a range of metal seated butterfly / shut-off and control valves for exhaust gas applications that meet the requirements of EN 12516-2 and ASME B16.34.
Typical applications for these valves in diesel engines, gas engines and exhaust gas systems are:
waste gates, EGR, turbo shutdown, slow steaming, air bypass, gas scrubbers, heat recovery
Somas exhaust gas valves have many technical advantages.
The geometry of the disc is designed in such a way that it only comes into contact with the seal when it is fully closed. This ensures that the wear on the sealing surface is kept to a minimum and a long service life is guaranteed.
The valves have a solid seat design and are therefore resistant to clogging.
The shaft bearings are designed as standard in metal-to-metal pairs, which means that the valves can be used without any problems in high temperature applications.
All valves are supplied as standard with a graphite gland. Other materials are available.
Somas VSS / HT and MTV / HT valves are bi-directional and can therefore be installed in both directions.”
“The swing disc valve type SD from Orbinox consists of a cast housing, a metal seat and a metal disc.
Full bore when open.
The swing disc valve is suitable for high switching cycles in difficult applications, such as dirt sluice applications, bulk materials, etc.
Technical features include the short installation length (lightweight design) and the protected pivot arm to avoid deposits.”
